Dillon GTX Plus Force Gauge Manuel d'utilisateur Page 1

GTX-Plus Series User’s Manual

GTX-Plus Series User’s Manual REV 2.1 10 Computer Control of Force Gauge A computer can control the force gauge by sending USB commands. USB Com

GTX-Plus Series User’s Manual REV 2.1 11 1.1) AUTO-OFF An Auto-off feature can be enabled to conserve battery power where the gauge powers down a

GTX-Plus Series User’s Manual REV 2.1 12 example LOWER LEVEL = 0 N, UPPER LEVEL = 20 N Load The “UPPER” LED will ON. Another LED O

GTX-Plus Series User’s Manual REV 2.1 13 example LOWER LEVEL = 10 N, UPPER LEVEL = 20 N Load The “UPPER” LED will ON. Another LED OFF.

GTX-Plus Series User’s Manual REV 2.1 14 To set DROP LEVEL, Press UP and DOWN to move the cursor point to DROP LEVEL and press ENTER key The display

GTX-Plus Series User’s Manual REV 2.1 15 1.4) FILTERING This function selects the display throughput rate i.e. the amount of averaging performed by

GTX-Plus Series User’s Manual REV 2.1 16 To set the constant factor, Use LEFT ARROW key to move the cursor point to FACTOR constant. Use UP and DOW

GTX-Plus Series User’s Manual REV 2.1 17 display will show Start, Stop option menu page. Press ESC key to return the auto averaging menu page. STAR

GTX-Plus Series User’s Manual REV 2.1 18 Use LEFT ARROW keys to move cursor point to the desired value. Use UP and DOWN keys to change the value, pre

GTX-Plus Series User’s Manual REV 2.1 19 2) DATABASE This use to view the saved record, delete last record, delete all record and calculate the stat

GTX-Plus Series User’s Manual REV 2.1 2 Table of Contents Table of Contents………………………………………………………… 2 Introduction………………………………………………………………… 3

GTX-Plus Series User’s Manual REV 2.1 20 Figure 15a Delete last Menu Press UP and DOWN to select NO and YES, If you selected NO and press E

GTX-Plus Series User’s Manual REV 2.1 21 SELECT RECORD SAVED RECORD: 002/200 MAX RECORD COUNT: 20 BEGIN RECORD: 001 END RECORD:

GTX-Plus Series User’s Manual REV 2.1 22 Figure 16 Date&Time Menu Press UP and DOWN to change the value, press and hold to scroll values.

GTX-Plus Series User’s Manual REV 2.1 23 6) ABOUT This shows the information of your gauge (Firmware revision, Model, Capacity, Serial number). To

GTX-Plus Series User’s Manual REV 2.1 24 GTX Specifications Capacity and Divisions Model No: mN N kN g-f kg-f oz-f lb-f GTX 5 5000 x 1 5 x 0.001

GTX-Plus Series User’s Manual REV 2.1 25 Conversion Factor Unit mN N kN g-f kg-f oz-f lb-f mN 1 0.001 1e-6 101.97e-3 101.97e-6 3.597e-3 2

GTX-Plus Series User’s Manual REV 2.1 26 Dillon, a Weigh-Tronix Brand 1000 Armstrong drive Fairmont, Minnesota 56031 Sales (507) 238-8796

GTX-Plus Series User’s Manual REV 2.1 3 Introduction Thank you for choosing the Nextech GTX series instrument. With correct use and regular re-cali

GTX-Plus Series User’s Manual REV 2.1 4 Powering the GTX for the first time The GTX is supplied with a set of 4 Nickel Metal Hydride AAA recharg

GTX-Plus Series User’s Manual REV 2.1 5 Using the GTX Fitting Accessories Couple fittings directly to the load cell stem or use an extension rod.

GTX-Plus Series User’s Manual REV 2.1 6 After the self test, providing no load has been applied to the instrument, the display will show all zeroes

GTX-Plus Series User’s Manual REV 2.1 7 For tensile force the indicator bar move from right to left. For compressive forces the indicator bar move fr

GTX-Plus Series User’s Manual REV 2.1 8 Peak Tension symbol Figure 3b Peak Tension Peak-Compression mode Press MODES key until appeared o

GTX-Plus Series User’s Manual REV 2.1 9 Invert Display The display may be inverted or “reversed”, so that the operator can read it more comfortabl