Dillon EDXtreme (Old) Manuel d'utilisateur Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 50
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
EDxtreme User Instructions 25
5.1.3 Config--Comm
Press the Comm key to enable or disable radio communication and configure serial
ports.
To configure serial ports, follow these steps:
1. Press the Comm key and you see the following screen:
2. Press COM 2 or COM 1.
The following display appears.
3. Select a transmission level using the Sel keys to scroll through the four
choices; Disabled (default), RS232, RS485, and RF. RF stands for Radio
Frequency and means transmission would be by radio (requires optional radio
board). Press Enter to accept the setting. See note below.
RS-232/RS-485 activity consumes more battery power.
COM2 is used to configure the optional radio board, if installed.
If you set the Trans Level to RF, steps 3-5 are automatically set and do not appear.
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Commentaires sur ces manuels

Pas de commentaire